NEWS

Photobucket has changed their terms of service and is no longer allowing 3rd party hosting. For this reason, my photos are no longer available for viewing. I am keeping the blog posts up so at least the text can be read.

I am currently in the process of migrating this blog onto Facebook. This will allow for the photos to be viewed again.

This process will take some time. I am sorry for the inconvenience.

Welcome

Whether you're an experienced builder or new to the hobby, I've gathered material from all over the web to produce the most complete, tab and slot, dollhouse assembly blog you can find.
Tip: 1. Read through all of the instructions that came with your kit first. 2. Find your dollhouse in this blog by using the drop down menu below. 3. Read through the building process in its entirety before beginning your project. Happy building!

View or print the More Minis Dollhouses Project Planner PDF to help you begin your next dollhouse project!

Donations

If you find the information on this blog helpful, please consider making a donation using the secure Paypal button below. Thank you!

Dollhouse Assembly Blogs

Search This Blog

Featured Post

Custom Rehab Week 01

This upcoming project is a little different from my usual ones. This is a rehab. This custom dollhouse belongs to a neighbor and she was ...

Monday, June 30

The Beacon Hill Dollhouse Revisited Week 15

Bedroom Closet
You must assemble and finish the bedroom closet before you do any other finishes to the bedroom.

Assemble the Second Floor Left Partition and Second Floor Closet Wall before installation into the dollhouse. This will allow you to finish the interior of the closet.

Wallpaper the area of the bedroom where the closet will go and then wallpaper the Second Floor Closet Wall on what will be the interior of the closet.

You only need to wallpaper three walls of the closet. You do not need to wallpaper the wall where the door opening is since it will not be visible from any angle.

The ceiling will also not be visible from any angle so you do not need to finish it in any way.

Once everything is dry, you can install the sub-assembly. You will need to use a mallet to tap it in place, making sure the Second Floor Closet Wall is flush with the hallway wall. Clamp and let dry.

You can see how the closet looks finished in the interior now that the sub-assembly is installed.

Keep In Mind
You certainly do not want to apply ceiling paper to this room yet because it will not allow you to install the Second Floor Left Partition and Second Floor Closet Wall sub-assembly you just built.

Do not apply flooring either until the sub-assembly is installed.




No comments:

 

Search Archive

Search Labels

Copyright and Disclaimer

Page copy protected against web site content infringement by Copyscape

  © More Minis @ Blogspot Copyright 2007 - 2017 All Rights Reserved

Back to TOP