Tiny things are made of awesome!

Welcome

Whether you're an experienced builder or new to the hobby, I've gathered material from all over the web to produce the most complete, tab and slot, dollhouse assembly blog you can find.
Tip: 1. Read through all of the instructions that came with your kit first. 2. Find your dollhouse in this blog by using the drop down menu below. 3. Read through the building process in its entirety before beginning your project. Happy building!

View or print the More Minis Dollhouses Project Planner PDF to help you begin your next dollhouse project!

Donations

If you find the information on this blog helpful, please consider making a donation using the secure Paypal button below. Thank you!

Dollhouse Assembly Blogs

Search This Blog

Featured Post

Custom Rehab Week 01

This upcoming project is a little different from my usual ones. This is a rehab. This custom dollhouse belongs to a neighbor and she was ...

Thursday, August 23

The Half Scale Chantilly Dollhouse Day 7

I continued doing touch ups and installed some baseboard trim. You have to make sure that you do not leave a single thing undone in these two floors before you move upwards in your assembly. Once the roof, front door and windows are installed, you will no longer have access to certain areas in these rooms.

Now is the time to install the interior doors as well. They need a lot of touch ups and you can still reach them from every angle at this stage. The doors of lasercut dollhouse kits are very easy to install because of the precise cuts. They need a little bit of sanding only and they pop right in.

Since I used extra trim on the backside of the staircase, that did not come with the kit, I had to cut off, at a slant, one corner of the door trim so it could fit properly on the first floor interior door.

I finished the staircase railing. The front, short railing on the second floor has a tab that goes into the wall but I cut that tab off and just set it flush to the wall. I didn't want the tight fit to damage the wallpaper so I decided to not struggle trying to fit that tab into the wall slot.

Lots and lots of touch ups had to be done so I can start the bay walls next.











No comments:

 

Search Archive

Search Labels

Copyright and Disclaimer

Page copy protected against web site content infringement by Copyscape

  © More Minis @ Blogspot Copyright 2007 - 2017 All Rights Reserved

Back to TOP