Tiny things are made of awesome!


Whether you're an experienced builder or new to the hobby, I've gathered material from all over the web to produce the most complete, tab and slot, dollhouse assembly blog you can find.
Tip: 1. Read through all of the instructions that came with your kit first. 2. Find your dollhouse in this blog by using the drop down menu below. 3. Read through the building process in its entirety before beginning your project. Happy building!

View or print the More Minis Dollhouses Project Planner PDF to help you begin your next dollhouse project!


If you find the information on this blog helpful, please consider making a donation using the secure Paypal button below. Thank you!

Dollhouse Assembly Blogs

Search This Blog

Featured Post

Custom Rehab Week 01

This upcoming project is a little different from my usual ones. This is a rehab. This custom dollhouse belongs to a neighbor and she was ...

Thursday, January 14

The Loganberry Mill Dollhouse Day 1

Click on Newer Posts at the bottom of each page so you can see each day of the construction.

Don't forget to read all the How To Guides, listed to the left, for information on proper assembly and finishing of your dollhouse.

The Loganberry Mill By Greenleaf

This kit is so simple to assemble that I didn't need to read the instructions. The first thing I needed to do was plan out the bash. I don't want the slanted roof in the side of the dollhouse, I actually want to make that into a patio.

In order for me to do that, I have to cut off the slant part of the front and back walls. I first used a ruler and pencil to mark the line I needed to cut and then scored it with a craft knife until I was able to snap it off.

For the back wall, I needed to just take the whole slanted piece off of the arch. I wouldn't be needing it.

I then took a piece of cardboard from a box I had and made two side walls on the right side of the dollhouse. I plan on making a gated doorway in between them so theres a way to get to the patio from the room and vice versa.

I assembled the entire dollhouse using tacky glue and clamped it with masking tape all night to dry.

Like I mentioned above, the kit is extremely easy to build. The parts speak for themselves on how they go and nothing needs to be finished in the interior before assembly since every room is accessible after construction.

No comments:


Search Archive

Search Labels

Copyright and Disclaimer

Page copy protected against web site content infringement by Copyscape

  © More Minis @ Blogspot Copyright 2007 - 2017 All Rights Reserved

Back to TOP