NEWS

Photobucket has changed their terms of service and is no longer allowing 3rd party hosting. For this reason, my photos are no longer available for viewing. I am keeping the blog posts up so at least the text can be read.

I am currently in the process of migrating this blog onto Facebook. This will allow for the photos to be viewed again.

This process will take some time. I am sorry for the inconvenience.

Welcome

Whether you're an experienced builder or new to the hobby, I've gathered material from all over the web to produce the most complete, tab and slot, dollhouse assembly blog you can find.
Tip: 1. Read through all of the instructions that came with your kit first. 2. Find your dollhouse in this blog by using the drop down menu below. 3. Read through the building process in its entirety before beginning your project. Happy building!

View or print the More Minis Dollhouses Project Planner PDF to help you begin your next dollhouse project!

Donations

If you find the information on this blog helpful, please consider making a donation using the secure Paypal button below. Thank you!

Dollhouse Assembly Blogs

Search This Blog

Featured Post

Custom Rehab Week 01

This upcoming project is a little different from my usual ones. This is a rehab. This custom dollhouse belongs to a neighbor and she was ...

Thursday, September 3

The Rosedale Dollhouse Day 3

Now that your walls have been wallpapered, it's time to put in the staircase. This staircase ends up facing the front of the dollhouse after the rest of the walls are put up. This means that you will not be able to view it from the back open side of the dollhouse unless you hinge the front door so you can view it through there.

Apply the first stringer against the wall with the oval window. Notice which side of the wall and which stringer it is. You're looking for the left stringer with the slot on it. You don’t have to stain the stringers because they will not be visible at all.

Once the stringers glue is dry, begin applying the risers. Stain them first. Because the dollhouse is laser cut, the edges fit perfectly flush to each other. The risers will not tip over. Now glue the other stringer to the other wall, again making sure your not gluing it to the wrong side of the wall. The stringer is glued to the kitchen side.

Once the glue is dry, sandwich both walls together, butting all the risers of the first wall to the stringer of the second. Make sure all edges are touching each other tightly. Straighten all the risers up. Clamp.

Stain all of your steps and glue them to the risers and stringers. You’ll have to slip your hand in this narrow staircase passageway to place them in there but its able to be done without much trouble. Clamp everything and let dry.

I stood the assembly up so you can better view how its suppose to look once done. As you can see all of the glue is still wet and visible. I labeled each room that each wall will face.










No comments:

 

Search Archive

Search Labels

Copyright and Disclaimer

Page copy protected against web site content infringement by Copyscape

  © More Minis @ Blogspot Copyright 2007 - 2017 All Rights Reserved

Back to TOP